Double boot Linux/Windows host – W10 to W10 works only in one direction

[StefanOlsson]

Hi, I have used NX severs and clients for many years and never had any problems. Thank you! Now I have a problem. I am trying to set up a dual boot system with Windows10/Ubuntu18.04. It is on a fast good laptop Lenovo W530 (64bit) with fast processors and 32Gb RAM and so on. I want to use it as an extra resource both as a Windows machine and Linux when I am doing bioinformatics as I have started doing as old professor. Sometimes these runs are long so I want the computer to stay at home and I want to run it from wherever I am. The computer is set up in a way so I can reboot from one system into the other and thus shift OS and back. I want to do that also remotely using NoMachine and that should work if I set up the server to start working automatically. I have thus installed the NoMachine software both on the Linux system and the Windows system. So if I call the dual boot computer A-Linux and A-Windows and I am trying to connect from a B-Windows (Windows10) computer the following works:

Client->server

A-Linux->B-Windows

A-Windows->B-Windows

B-Windows->A-Linux

But

B-Windows->A-Windows does not work and gives me a “Error is 108: Connection reset by peer”

I have attached the log-file from B when this happens.

I use NM 6.7.6_7 for all connections. The rest of the info about my computers systems is in the text above.

Hope you can help me solve the problem.

Best wishes,

Stefan

Attachments:

1. R-STEFANOLSSON861-3152-3B02AF14B3FD5735C332C412FAFECAA3.zip

[Britgirl]

Hi, the logs from the server side would be useful. Please follow the instructions here: https://www.nomachine.com/DT10O00163

You can send them directly using the address forum[at]nomachine[dot]com making sure you include the title in the subject. Thanks.

[Author]

Posts