Forum / NoMachine for Windows / NM 6.9.2 fails to connect to Win XP SP3
- This topic has 8 replies, 3 voices, and was last updated 4 years, 6 months ago by Britgirl.
-
AuthorPosts
-
April 1, 2020 at 11:30 #26402qqalexnParticipant
Linux mint 19.3 or Mac High Sierra NoMachine clients timeout attempting connection to Windows CP Pro Workstation SP3.
Interestingly, REVERSE connections work! I.e.., Win XP as client to the Linux Mint OR Mac machines.
All machines are on same Local lan. Windows XP firewall is off. I can ping the XP machine. I use the XP machine’s 10.1.10.27 IP address, as shown in the XP client, and NX protocol. This is my only NoMachine setup that doesn’t work and it’s the only one with WindowTs XP.
Text file session Log from LM client is attached.
Yes I’ve uninstalled, rebooted, reinstalled, etc.
Anyone know how to have a successful NM 6.9.2 connection to an XP Pro workstation host/server?
Thanks.
April 2, 2020 at 09:12 #26440qqalexnParticipantFWIW Using [removed], I can connect to the XP machine just fine. Same connection topology. Only change is using (removed) instead of NoMachine.
I’m retrying to attach log from my previous post.
Attachments:
April 2, 2020 at 11:04 #26460fishermanModeratorHello,
-
Do you have Windows XP SP3 32bit or 64bit version?
Reproduce problem, collect logs and send them to forum[at]nomachine[dot]com? Instructions about debug and collecting logs you can find there: https://www.nomachine.com/DT10O00163#1.4April 2, 2020 at 17:35 #26463qqalexnParticipantThanks for replying.
xp pro workstation sp3 32-bit.
Which logs? Client or server?
Thanks.
April 2, 2020 at 17:40 #26466fishermanModeratorHi,
As the problem is on the server side, we need server logs of the machine you are using “xp pro workstation sp3 32-bit”.
April 3, 2020 at 07:09 #26473qqalexnParticipantSent.
April 6, 2020 at 13:29 #26560fishermanModeratorHello,
in the received logs we could not see any incoming connection to port 4000.
I would ask you to check
1. if you have firewall blocking port 4000
2. try to connect to the 127.0.0.1:4000 on that Windows XPor try to use different port in nxserver.cfg or use following article https://www.nomachine.com/AR11L00823
# Specify the TCP port where the NX service is listening. # NXPort 4000
April 7, 2020 at 07:23 #26570qqalexnParticipantNo Firewall or antivirus active. When I do, rarely, connect, turning them on makes no difference and I can disconnect and reconnect with them on.
nc (netvcat) command line utility reports can connect to machine’s IP address. This happens even when nomachine client cannot connect AND after clicking “stop server”
” nc -zv 10.1.10.27 4000
Connection to 10.1.10.27 4000 port [tcp/*] succeeded!
”If I use portqry.exe (version 2) on the problem machine, I see that nxserver is always listening on port 4000. And says established if I manage to get a connection.
I’ve found that repeatedly restarting the nxserver via “server restart” button sometimes allows NoMachine session with this machine. This approach is unpredictable. However, IF it results in being able to connect once. That ability survives connect/disconnect cycles and further server restarts, but NOT rebooting the OS.
On BOTH of my xp pro sp3, 32-bit machines, havingĀ installed NoMachine results in this error message on windows shutdown:
“tasklist.exe unable to locate component. The application has failed to start because framedyn.dll could not be found. Reinstalling the application may fix the problem.”
Both those files are present, not corrupt and the error is gone when NoMachine is uninstalled.
This message also appears when NoMachine is restarted.
Only one of the xp computers has the connection problem. though both show this error message.
I also notice that the “server status” list box of connection ip addresses has only one or two entries (nx: ) and without any external addresses rather than the many I see in Linux NoMachine server status that have external addresses. All on same LAN.
Anyway, I’ve wasted a ton of time on this. I think what’s needed is some scrutiny of the logs to see if something is interfering with this instance of NoMachine’s server. Or I need better, straightforward, NoMachine diagnostic tools to see what’s happening in the dialog between machines.
Thanks.
April 15, 2020 at 16:22 #26759BritgirlKeymasterAfter serveral attempts we are still not able to reproduce the problem. The only last try is to do what we suggested before: you didn’t tell us if you had tried changing the port.
What happens if you shut down the server completely the instead of just stopping and then try with netcat again?
-
AuthorPosts
Closed because the user did not provide further feedback. Please notify us if you confirm that it is resolved or open a new topic if you have the same problem.