ARM package installs with error /usr/NX/bin/nxserver.bin: No such file or directory

[chchang]

I download nomachine_7.9.2_1_armv7hl.tar.gz and unarchive it, then move NX to /usr/

and running

sudo /usr/NX/nxserver –install

here is the console messages

chchang@phicomm-n1:~/Downloads$ sudo /usr/NX/nxserver –install
NX> 700 Starting install at: Fri Apr 22 11:47:56 2022.
NX> 700 Installing: nxclient version: 7.9.2.
NX> 700 Using installation profile: Ubuntu.
NX> 700 Install log is: /usr/NX/var/log/nxinstall.log.
NX> 700 Compiling the USB module.
NX> 700 Installing: nxplayer version: 7.9.2.
NX> 700 Using installation profile: Ubuntu.
NX> 700 Install log is: /usr/NX/var/log/nxinstall.log.
NX> 700 To connect the remote printer to the local desktop,
NX> 700 the user account must be a member of the CUPS System Group: lpadmin.
NX> 700 Installing: nxnode version: 7.9.2.
NX> 700 Using installation profile: Ubuntu.
NX> 700 Install log is: /usr/NX/var/log/nxinstall.log.
NX> 700 Creating configuration in: /usr/NX/etc/node.cfg.
NX> 700 ERROR: Cannot validate license file.
NX> 700 Node install completed with warnings.
NX> 700 Please review the install log for details.
NX> 700 Installing: nxserver version: 7.9.2.
NX> 700 Using installation profile: Ubuntu.
NX> 700 Install log is: /usr/NX/var/log/nxinstall.log.
NX> 700 Creating configuration in: /usr/NX/etc/server.cfg.
NX> 700 ERROR: Cannot validate license file.
NX> 700 Cannot validate node license file.
NX> 700 Cannot add installation data to database.
NX> 700 Failed to run ‘/usr/NX/bin/nxkeygen’.
/usr/bin/sed: can’t read /var/NX/nx/.ssh/authorized_keys: No such file or directory
/usr/bin/sed: can’t read /var/NX/nx/.ssh/authorized_keys: No such file or directory
/usr/bin/sed: can’t read /var/NX/nx/.ssh/authorized_keys2: No such file or directory
/usr/bin/sed: can’t read /var/NX/nx/.ssh/authorized_keys2: No such file or directory
NX> 700 Server install completed with warnings.
NX> 700 Please review the install log for details.
NX> 700 Install completed with errors at: Fri Apr 22 11:49:08 2022.
NX> 700 NoMachine was configured to run the following services:
NX> 700 NX service on port: 4000

but it doesn’t work on port 4000

chchang@phicomm-n1:~/Downloads$ sudo netstat -antlp|grep 4000
chchang@phicomm-n1:~/Downloads$

and there are some error log in /var/log/syslog

Apr 22 11:49:09 localhost nxserver[67201]: /etc/NX/nxserver: line 156: /usr/NX/bin/nxserver.bin: No such file or directory
Apr 22 11:49:09 localhost systemd[1]: nxserver.service: Succeeded.
Apr 22 11:49:09 localhost systemd[1]: nxserver.service: Scheduled restart job, restart counter is at 5.
Apr 22 11:49:09 localhost systemd[1]: Stopped NoMachine Server daemon.
Apr 22 11:49:09 localhost systemd[1]: nxserver.service: Start request repeated too quickly.
Apr 22 11:49:09 localhost systemd[1]: nxserver.service: Failed with result ‘start-limit-hit’.
Apr 22 11:49:09 localhost systemd[1]: Failed to start NoMachine Server daemon.

but /usr/NX/bin/nxserver.bin is just there.

chchang@phicomm-n1:~/Downloads$ ls -lart /usr/NX/bin/nxserver.bin
-rwxr-xr-x 1 root root 77592 Mar 19 09:30 /usr/NX/bin/nxserver.bin
chchang@phicomm-n1:~/Downloads$

any suggestions to fix the problem ?

 

 

 

[Britgirl]

This looks like you might have installed the wrong package for your device.

For Raspberry see the installation notes that we link from the download page here:  https://knowledgebase.nomachine.com/AR07N00896. For other ARM devices see here: https://knowledgebase.nomachine.com/AR03M00842

The package you select depends on the architecture of your device. To check this, open a terminal on your device and run the uname -m command. Some examples:

armv6l – means that you should useARMv6 packages
armv7l – means that you should use ARMv7 packages
aarch64 – means that you should use ARMv8 packages

So in your case I would:

1) uninstall with

sudo /usr/NX/scripts/setup/nxserver --uninstall
sudo rm -rf /usr/NX/ /etc/NX/ /var/NX .nx

2) Check architecture using:
uname -m

3) Download and install the correct package.

[chchang]

Thanks for your help, after downloading the correct package, it works now!

[Author]

Posts