Camera won’t work on Jetson Orin NX via using NoMachine (headless)

Forum / NoMachine for ARM / Camera won’t work on Jetson Orin NX via using NoMachine (headless)

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #53236
    Haidit
    Participant

    Hi, I’m not sure if it’s a right place to ask for solution, but I still hope I’ll find some help here.
    I have a Jetson Orin NX with Jetpack 5.1.2 installed on it.
    I need to use it without physical monitor via connecting with NoMachine. If I do so, my IMX477 camera won’t work. It works fine, if I’m using monitor.

    To connect without monitor I used:

    sudo systemctl set-default multi-user.target
    sudo /etc/NX/nxserver –restart
    reboot

    Thanks a lot in advance

    UPD:
    v4l2-ctl –list-devices output is fine:

    NVIDIA Tegra Video Input Device (platform:tegra-camrtc-ca):
    /dev/media0

    vi-output, imx477 10-001a (platform:tegra-capture-vi:2):
    /dev/video0

    #53251
    Bilbotine
    Participant

    Hi Haidit,

    Please try to install xfce; xfce physical session should work, even without a monitor plugged.

    On our side it works with NVIDIA Jetson Nana, it should be the same on your model. You can check our article “Tips for using NoMachine on NVIDIA Jetson Nano” for more info: NoMachine – Tips For Using NoMachine On NVIDIA Jetson Nano – Knowledge Base

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic. Please login .