Error 61 Connection Refused

Forum / NoMachine for Linux / Error 61 Connection Refused

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #17832
    mtapal
    Participant

    Hello,

    We have tried to connect to a Linux machine with NX Server running properly but cannot connect and get ‘Error 61 Connection Refused’ every time even after allowing authentication via the built-in DB, PAM or any other method. We have checked the networking, ports and all are fine. The logs from the client are:

    Error is 61: Connection refused’.

    8672 775 16:24:24 753.653 ClientSession: Stopping session at 0x7f90f1488230.

    Info: Slave server running with pid 79123.

    8672 775 16:24:24 795.990 Connection: Stopping connection at 0x7f90f3a81030.

    Info: Listening to slave connections on port 37710.

    8672 775 16:24:24 796.189 ClientDaemonConnector: Stopping the current connection.

    8672 775 16:24:24 796.232 Connection: Stopped connection at 0x7f90f3a81030.

    8672 775 16:24:24 813.917 ClientSession: Stopped session at 0x7f90f1488230.

    8672 59139 16:24:26 249.546 ClientUpnp: WARNING! Mapping of port ‘4496’ failed after ‘6817’ ms.

    8672 59139 16:24:33 069.664 ClientUpnp: WARNING! Mapping of port ‘4496’ failed after ‘6820’ ms.

    8672 775 16:26:23 572.791 ClientSession: Starting session at 0x7f90f1488230.

    8672 775 16:26:23 575.094 ClientSession: Going to start session ‘/Users/iadmin/Documents/NoMachine/Connection to user6-5.corp.innovium.com.nxs’.

    8672 775 16:26:23 583.048 Connection: Finishing connection at 0x7f90f3a81030.

    8672 775 16:26:23 583.072 ClientDaemonConnector: Stopping the current connection.

    8672 775 16:26:23 583.089 Connection: Finished connection at 0x7f90f3a81030.

    8672 775 16:26:23 583.097 Connection: Initializing connection at 0x7f90f3a81030.

    8672 775 16:26:23 583.154 Connection: Initialized connection at 0x7f90f3a81030.

    8672 775 16:26:23 583.174 Connection: Starting connection at 0x7f90f3a81030.

    8672 775 16:26:23 583.189 ClientDaemonConnector: Starting a new connection to host ‘10.46.1.227’ on port ‘4000’.

    8672 775 16:26:23 583.447 Connection: Started connection at 0x7f90f3a81030.

    8672 775 16:26:23 588.460 ClientSession: Started session at 0x7f90f1488230.

    8672 775 16:26:24 379.579 Connection: Connection at 0x7f90f3a81030 failed.

    8672 775 16:26:24 379.606 ClientSession: Runnable at 0x7f90f3a81030 caused the session at 0x7f90f1488230 to fail.

    8672 775 16:26:24 379.618 ClientSession: Failing reason is ‘Could not connect to the server.

     

    Error is 61: Connection refused’.

    8672 775 16:26:24 391.950 ClientSession: Stopping session at 0x7f90f1488230.

    Info: Slave server running with pid 78179.

    8672 775 16:26:24 419.699 Connection: Stopping connection at 0x7f90f3a81030.

    Info: Listening to slave connections on port 40621.

    8672 775 16:26:24 419.851 ClientDaemonConnector: Stopping the current connection.

    8672 775 16:26:24 419.885 Connection: Stopped connection at 0x7f90f3a81030.

    8672 775 16:26:24 429.898 ClientSession: Stopped session at 0x7f90f1488230.

    8672 59139 16:26:30 347.170 ClientUpnp: WARNING! Mapping of port ‘4496’ failed after ‘6776’ ms.

    2018-03-09 16:34:17.354 nxplayer[8672:174785] action ok:

     

    Can someone please point me in the right direction?

    Best regards.

    Munz.

    #17844
    Britgirl
    Keymaster

    What product and version from NoMachine did you install on the connecting client?

    What product and version from NoMachine did you install on the remote server?

Viewing 2 posts - 1 through 2 (of 2 total)

Closed because the user did not provide further feedback. Please notify us if you confirm that it is resolved or open a new topic if you have the same problem.