Forum Replies Created
-
AuthorPosts
-
Dawid.GParticipant
Hi,
NoMachine has a feature that automatically changes the server resolution to match the client.
In order to turn it off, you may go to the “Display settings” in Menu Panel -> Display -> Change settings and uncheck the “Match the client resolution upon connecting” option.
After reconnecting everything should work fine.
Dawid.GParticipantHello,
We were not able to reproduce your issue with the configuration you provided.
Looking by the dmesg output seems like it may be something wrong with your VM or system configuration, rather than nxusb driver.
Make sure USB controller on your machine works properly.
Dawid.GParticipantHello,
NoMachine USB Service performance is highly dependent on connection speed between the two machines. Make sure that your internet connection does not have much latency. For example, if you’re using wifi, you might consider switching to cable connection.
Dawid.GParticipantYou can check the “Disable frame buffering on decoding” option in the Display settings. It should improve performance.
Btw, what did you mean by saying that “Image latency is correct”? Could you elaborate on this?
Thanks
Dawid.GParticipantCould you tell us what’s the exact model of your Wacom tablet? It’d be very helpful for us.
Thanks in advance
Dawid.GParticipantHello,
In order to achieve this, you need to connect the Graphics tablet via NoMachine USB Service during the session.
This is how to do it: https://www.nomachine.com/DT10O00156#4.3
Dawid.GParticipantDid you try something like this:
1. Uninstall NoMachine
2. Reboot the machine
3. Check if “NoMachine USB Host Adapter” appears in device manager. If so, uninstall it.
4. Unregister “NoMachine USB Hub Filter”. To do that, you need to:
a) Open Windows registry: Menu start -> run -> regedit
b) Find the following registry key in the tree on the left:
“HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{36fc9e60-c465-11cf-8056-444553540000}”
c) Find UPPERFILTERS variable on the right side.
Note: it should contain list of registered filters, but maybe it’s empty if no filter is registered.
Edit UPPERFILTERS variable and remove entries containing nx prefix (e.g. “nxusbf”) if they exist.5. Reboot the machine
Regards.
October 20, 2017 at 12:29 in reply to: Installation of the NoMachine USB Adaptor Failed Error Code 183 #16141Dawid.GParticipantHello,
This issue is probably related with registering filters in registry. To resolve this I would suggest to follow those steps:
1. Uninstall NoMachine
2. Reboot the machine
3. Check if “NoMachine USB Host Adapter” appears in device manager. If so, uninstall it.
4. Unregister “NoMachine USB Hub Filter”. To do that, you need to:
a) Open Windows registry: Menu start -> run -> regedit
b) Find the following registry key in the tree on the left:
“HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{36fc9e60-c465-11cf-8056-444553540000}”
c) Find UPPERFILTERS variable on the right side.
Note: it should contain list of registered filters, but maybe it’s empty if no filter is registered.
Edit UPPERFILTERS variable and remove entries containing nx prefix (e.g. “nxusbf”) if they exist.
5. Reboot the machine
6. Install NoMachine
I hope this will help you.
Regards.
-
AuthorPosts