hatunike

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • in reply to: Segmentation fault on Arch #29786
    hatunike
    Participant

    So I did end up solving this issue that vexed me for awhile. I felt like i had tried everything. But the problem was that when I was uninstalling there was still some local files that must have been borked or corrupted or something from the very first time i tried running NoMachine

    I had looked up some ways to totally remove NoMachine, but somehow had missed anyone saying to specifically remove /.nx Once i removed that, then all the installs started working and all my problems went away.

    The problems i was experiencing were directly tied to the fact that I couldn’t/hadn’t properly removed NoMachine from my system. If you run into this problem, hopefully this helps, and good luck!

    in reply to: Segmentation fault on Arch #29347
    hatunike
    Participant

    I’m pretty new to this stuff, so sorry if i didn’t grab the right stuff. But here is what i’ve found, so i discovered that nxclient is just dumping like every second. I had like 10,000 dumps. i’ll post nxclient AND nxplayer – each had dumps :

    Reading symbols from /usr/NX/bin/nxclient.bin…
    (No debugging symbols found in /usr/NX/bin/nxclient.bin)
    [New LWP 1749644]
    [New LWP 1749651]
    [New LWP 1749653]
    [New LWP 1749652]
    [New LWP 1749649]
    [New LWP 1749650]
    [Thread debugging using libthread_db enabled]
    Using host libthread_db library “/usr/lib/libthread_db.so.1”.
    Core was generated by/usr/NX/bin/nxclient.bin –monitor –pid 3732785′.
    Program terminated with signal SIGSEGV, Segmentation fault.
    #0 0x00007fa1799fa168 in ?? () from /usr/NX/lib/libfreetype.so
    [Current thread is 1 (Thread 0x7fa1769fc8c0 (LWP 1749644))]

    Reading symbols from /usr/NX/bin/nxplayer.bin…
    (No debugging symbols found in /usr/NX/bin/nxplayer.bin)
    [New LWP 1706195]
    [New LWP 1706203]
    [Thread debugging using libthread_db enabled]
    Using host libthread_db library “/usr/lib/libthread_db.so.1”.
    Core was generated by `/usr/NX/bin/nxplayer.bin’.
    Program terminated with signal SIGSEGV, Segmentation fault.
    #0 0x00007f1df9199168 in ?? () from /usr/NX/lib/libfreetype.so
    [Current thread is 1 (Thread 0x7f1df74be8c0 (LWP 1706195))]
    (gdb)

    Just for completeness this is what the coredumpct list kind of looks like, truncated to just a few of the 10,000 logs :

    Thu 2020-09-03 17:23:03 MDT 1705897 1000 1000 11 present /usr/NX/bin/nxclient.bin
    Thu 2020-09-03 17:23:05 MDT 1705999 1000 1000 11 present /usr/NX/bin/nxclient.bin
    Thu 2020-09-03 17:23:06 MDT 1706081 1000 1000 11 present /usr/NX/bin/nxclient.bin
    Thu 2020-09-03 17:23:07 MDT 1706162 1000 1000 11 present /usr/NX/bin/nxclient.bin
    Thu 2020-09-03 17:23:08 MDT 1706195 1000 1000 11 present /usr/NX/bin/nxplayer.bin
    Thu 2020-09-03 17:23:09 MDT 1706242 1000 1000 11 present /usr/NX/bin/nxclient.bin
    Thu 2020-09-03 17:23:10 MDT 1706349 1000 1000 11 present /usr/NX/bin/nxclient.bin
    Thu 2020-09-03 17:23:11 MDT 1706431 1000 1000 11 present /usr/NX/bin/nxclient.bin
    Thu 2020-09-03 17:23:13 MDT 1706506 1000 1000 11 present /usr/NX/bin/nxclient.bin
    Thu 2020-09-03 17:23:45 MDT 1706768 1000 1000 11 present /usr/NX/bin/nxclient.bin

    finally – here is the ldd /usr/NX/bin/nxplayer.bin :

    ldd /usr/NX/bin/nxplayer.bin
    linux-vdso.so.1 (0x00007fff5ca67000)
    libnxdifb.so => not found
    libnxdixl.so => not found
    libnxdiex.so => not found
    libnxcsl.so => not found
    libnxcim.so => not found
    libnxc.so => not found
    libnx.so => not found
    libnxd.so => not found
    libnxn.so => not found
    libnxne.so => not found
    libnxlo.so => not found
    libogg.so => /usr/lib/libogg.so (0x00007fae67edb000)
    libz.so => /usr/lib/libz.so (0x00007fae67ebf000)
    libpixman.so => not found
    libqt.so => not found
    libmdnsd.so => not found
    libdl.so.2 => /usr/lib/libdl.so.2 (0x00007fae67eb9000)
    libpthread.so.0 => /usr/lib/libpthread.so.0 (0x00007fae67e97000)
    libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0x00007fae67cb8000)
    libm.so.6 => /usr/lib/libm.so.6 (0x00007fae67b72000)
    libgcc_s.so.1 => /usr/lib/libgcc_s.so.1 (0x00007fae67b58000)
    libc.so.6 => /usr/lib/libc.so.6 (0x00007fae6798f000)
    /lib64/ld-linux-x86-64.so.2 => /usr/lib64/ld-linux-x86-64.so.2 (0x00007fae67f0b000)

    in reply to: Segmentation fault on Arch #29215
    hatunike
    Participant

    Yes, same behavior. I downloaded the free x84_64.tar.gz and installed via the install script. It should be noted that the server is working and does work regardless of the way i install it – it is simply the nxplayer that has the segmentation fault (regardless of how I install it).

    in reply to: Segmentation fault on Arch #29186
    hatunike
    Participant

    Arch Linux x86_64
    5.8.3-arch1-1
    i3 (specifically i3-gaps)

    For what it’s worth, i have a friend that has a very similar setup to me (same kernel, same architecture) and everything works great for him.

Viewing 4 posts - 1 through 4 (of 4 total)