Forum Replies Created
-
AuthorPosts
-
RosssiiiiParticipant
Where do I have to execute that command ?
I tried using cmd.exe but it doesn’t give me a result:
NoMachine version is 6.2.4
But in past days after the post it worked well… today not, and I need to open manually the door in the GUI of the program.
RosssiiiiParticipantHello 🙂
Yes, today the problem occurred again on linux:
so i lunch this two commands on terminal and later i generate the zip file.
https://drive.google.com/file/d/1e3o7p27fXQcepasRuoTb–bZeB0egRew/view?usp=sharing
Now i will send it on email mentioning this discussion.
RosssiiiiParticipant3. Please enable debug, restart nxserver, reproduce the problem and show us the result of the following commands:
I don’t understand if I have to execute these commands only if the UPnP wasn’t enabled ?
I also followed the guide to activate the log file, I have left out the activation of the log file concerning web sessions;
Today for example it worked well automatically on Debian and on Windows 8.1…I don’t know why some times it don’t work fine 🙁
Anyway here is the port that i have activated on my router, the gw port is UDP true ?:
https://drive.google.com/file/d/1wBcG3h2fr7GtcM3Oox4CNcKnh8CQECIk/view?usp=sharing
Sorry I did not understand which address I have to send the log files ?
When do I understand that a log file is created ?
On Windows I don’t understand where they are created, here in NoMachine folder there aren’t:
RosssiiiiParticipantHello 🙂
I think that the issue is the second case: ” the port is opened sometimes, then other times it’s not open? If that’s the case, does it happen on both Windows and Debian? Or just Windows? ”
the first times only happened on Windows (i tested on 8.1 and 10 both x64), while now it also often happens on Debian 9.0 x64.
Often on Debian when it happen i only need to go in preference and click to check the GW door that remains the same at any boot of the pc:
on Windows i need to configure the port forward on router settings in order to open the gw port in question, because otherwise this error comes out:
i have NoMachine 6.0.78 for Linux and also on Windows i use the least version.
For Linux i have to follow this guide:
https://www.nomachine.com/DT10O00163#1.1.
the problem that occurs is about the server side?
December 22, 2017 at 10:48 in reply to: Help to configure remote WAN control on Windows & Linux #16971RosssiiiiParticipantI fixed, I configured in this way without port forwarding :
https://drive.google.com/file/d/1511zO4n4DrKyp_S4eoM9IdFv0ZkvNqcd/view
I have activated the gateway port, I’m testing it on my 3 PC with Debian 9.0 ; Win8.1 e 10 x64
——
i have a few questions.
How i can do:
1)when computer is connected to different wifi ?
2)if i have a dynamic public IP ?
-
AuthorPosts