Forum Replies Created
-
Posts
-
Hi,
I ran that and no luck — also for the last line confusion, I had pasted the log file but it was too long. I attached a word doc
I was basically talking about these lines
default11:21:20.696147-0500kernelnxfs: caller is not a member of nxfs admin group. Either add user (id=501) to group (id=0), or set correct ‘vfs.generic.nxfs.tunables.admin_group’ sysctl value.
error11:21:21.176945-0500kernelSystem Policy: nxfs(11622) deny(1) file-unmount /System/Volumes/Data
If you look at the log, the first time I try to attach the disk it takes a while and outputs all of that — then fails. Once I try to mount it again, it just throws the two lines posted above every time, not the whole startup that’s in the log
Also, running your command nothing was coming up in the console for some reason.
Just looked like something relevant, sorry
This is the only other error really but it’s for unmounting, which after it fails it unmounts?
error11:21:21.176945-0500
kernel
System Policy: nxfs(11622) deny(1) file-unmount /System/Volumes/Data
This is the whole log file (attached), when I first try to mount it does everything but once it fails and I try to mount, it just has the two lines at then end displayed. It’s a bit long
Hey,
Thought I had replied to this but turns out I didn’t sorry
Found the issue
nxfs: caller is not a member of nxfs admin group. Either add user (id=501) to group (id=0), or set correct ‘vfs.generic.nxfs.tunables.admin_group’ sysctl value.
Seems like an open bug
Sudden termination of the nxfs service on macOS Catalina
Hi,
No crash logs but there are console messages when I try to mount it
error 13:22:13.102790-0500 kernel System Policy: nxserver.bin(118) deny(1) system-privilege 10006
com.apple.mDNSResponder default 13:22:13.134397-0500 mDNSResponder [R28837] DNSServiceQueryRecord(15000, 0, <mask.hash: ‘THdYPejrX5jVEYFfnVS/Xg==’>, Addr) START PID[118](nxserver.bin)
com.apple.mDNSResponder default 13:22:13.134816-0500 mDNSResponder [R28837] DNSServiceQueryRecord(15000, 0, <mask.hash: ‘gVpRIfcaJURddPqDgVnHSw==’>, Addr) STOP PID[118](nxserver.bin)
com.apple.networkextension default 13:27:06.125504-0500 neagent Failed to find nxserver in LaunchServices
com.apple.networkextension default 13:27:06.125667-0500 nehelper Failed to find nxserver using neagent
I’m not able to really find more info on it.. but maybe I suspect it is something to do with my network
I tried disabling my firewall, and no luck.. Not on any sort of VPN on my home network
I also recently switched ISPs, and it’s still doing it for both.
Thanks again for helping, for your questions:
when you mention that Mac starts hanging, do you mean NX session (do you use terminal in session or are you checking it on actual machine) or actual system starts hanging?
The actual macOS terminal hangs, so it is the mac system hanging itself (only the terminal hangs, not the macOS itself e.g. chrome if it was opened. If that makes sense, basically any command that is ran in Terminal (e.g. if I ran a “ls”) it will hang until the mount fails, then ls will display the results.
When you press connect button, does it show up permission asking widget for nxfs? or does it show that it is blocked? https://knowledgebase.nomachine.com/AR01P00962 even if you already allowed it? Can you check does it actually blocked?
No permission pops ups for nxfs. I’ve allowed. File sharing is and I have “Everyone” allowed to read write. I also set NX to read write, but that should be covered under everyone.
nxclient, nxserver, nxnode, and NoMachine entries are all added for Full Disk Access in Security and Privacy
Same for Accessibility, and Screen Recording options.
I have completed that article already before.
Also, can you run again this command while you are forwarding disk and when it fails after too:
Before Running
Executing: /usr/bin/kmutil showloaded
No variant specified, falling back to release
164 0 0xffffff7f9ce98000 0x3000 0x3000 com.nomachine.driver.nxau (4.1.b2) 78172556-B6A4-3112-BA41-E79D18108476 <128 6 5 3 1>During running mount (fails)
Executing: /usr/bin/kmutil showloaded
No variant specified, falling back to release
164 0 0xffffff7f9ce98000 0x3000 0x3000 com.nomachine.driver.nxau (4.1.b2) 78172556-B6A4-3112-BA41-E79D18108476 <128 6 5 3 1>
189 0 0xffffff7f9ccba000 0x3000 0x3000 com.nomachine.driver.nxusbproxy (130.10) 2042D4C4-F2A8-3F60-A690-3F0E5FEFA06B <8 6 5 3 1>
190 0 0xffffff7f9ccd8000 0x1000 0x1000 com.nomachine.driver.nxusbvic (130.10) 8410FE92-FC08-350D-8C55-BD983F6717A4 <14 8 6 5 3 1>
191 0 0xffffff7f9ccb3000 0x6000 0x6000 com.nomachine.driver.nxtun (4.1.b4) 01F02277-4C8E-3D43-A2B7-A77738C8D210 <8 6 5 1>
192 0 0xffffff7f9ccbf000 0x15000 0x15000 com.nomachine.driver.nxusbvusb (130.10) AD25CADC-FAE8-31E5-9F00-418D868B37FE <66 22 14 8 6 5 3 1>
193 0 0xffffff7f9cca1000 0x10000 0x10000 com.nomachine.kext.nxfs (4.1.b1) BFEE045F-718B-31CD-AA31-0E114A139EB3 <8 6 5 3 1>Post run
Executing: /usr/bin/kmutil showloaded
No variant specified, falling back to release
164 0 0xffffff7f9ce98000 0x3000 0x3000 com.nomachine.driver.nxau (4.1.b2) 78172556-B6A4-3112-BA41-E79D18108476 <128 6 5 3 1>
189 0 0xffffff7f9ccba000 0x3000 0x3000 com.nomachine.driver.nxusbproxy (130.10) 2042D4C4-F2A8-3F60-A690-3F0E5FEFA06B <8 6 5 3 1>
190 0 0xffffff7f9ccd8000 0x1000 0x1000 com.nomachine.driver.nxusbvic (130.10) 8410FE92-FC08-350D-8C55-BD983F6717A4 <14 8 6 5 3 1>
191 0 0xffffff7f9ccb3000 0x6000 0x6000 com.nomachine.driver.nxtun (4.1.b4) 01F02277-4C8E-3D43-A2B7-A77738C8D210 <8 6 5 1>
192 0 0xffffff7f9ccbf000 0x15000 0x15000 com.nomachine.driver.nxusbvusb (130.10) AD25CADC-FAE8-31E5-9F00-418D868B37FE <66 22 14 8 6 5 3 1>
193 0 0xffffff7f9cca1000 0x10000 0x10000 com.nomachine.kext.nxfs (4.1.b1) BFEE045F-718B-31CD-AA31-0E114A139EB3 <8 6 5 3 1>After forwarding fails, can you click again on disk (it will show red exclamation mark on it) and check does it show some error message above “export this disk at session startup” option?
The error is just a generic
“Failed to connect the disk H:/”
I tried exporting as public, and private as well as changing the export as — no luck
I changed the public export to the public folder on macOS, from the default mount folder but still no luck
Hi,
1. What are you doing exactly? When you connect from the Windows client to the Mac server, do you forward Mac’s disk on Win or Win’s disk on Mac?
Connecting from Windows machine to MacOS. I am forwarding a disk from Windows to the Mac. I have multiple disks and none of them work.2. Does it succeed or not? If not, what do you get as an error?
It fails, and the error is above is the one that pops up.
There are no other errors, I even tailed nxerror and watched while it failed with no error msg in log3. What are the client and server NoMachine versions?
7.6.2 Client
7.6.2 Server4. What are the Mac and Windows versions?
Windows 10.0.19042 Build 19042
MacOS Big Sur5. When does the Mac hanging starts? While trying to forward disk or after also when if it succeeded?
As above, it doesn’t succeed. It hangs once I click connect from NoMachine menu, and I see the disk briefly mount in the directory from finder, and it disappears. If I’m running a tail or even an ls command on terminal it hangs until it’s done.6. What is the output of the command below on Mac? kextstat|grep nx
Executing: /usr/bin/kmutil showloadedNo variant specified, falling back to release
156 0 0xffffff7f9ce98000 0x3000 0x3000 com.nomachine.driver.nxau (4.1.b2) 78172556-B6A4-3112-BA41-E79D18108476 <148 6 5 3 1>
Hi,
Audio has been working for me always, but I did notice that that option was showing about it being blocked so I set to allow, and restarted but it hasn’t fixed it unfortunately.
Hey, so sorry I will do this now
The topic wasn’t approved and I had forgotten about it have been trying to search around and fix this. It has to do with mac permissions I bet, as I see the disk pop up then immediately go away on file explorer
It is weird, it hangs my mac if I try to do any commands on terminal until the mounting fails