Forum Replies Created
March 7, 2023 at 23:03 in reply to: Select Wifi’s IP over Ethernet’s IP #43274
yeah wifi’s IP was en example. I’m attaching here some printscreens from the server(pc) and tablet(client)
ethernet’s ip : 192.168.1.5
I have read the manual and tried this from the first time but still when i connect ethernet I can’t connect to the Wifi’s IP.
There’s no firewall problem
geo@geo:~$ sudo ufw status
Thanks again for the help my friend.
Attachments:March 7, 2023 at 09:41 in reply to: Select Wifi’s IP over Ethernet’s IP #43242
Could you show me which settings did you choose from the app, so you connected to Wi-Fi and not to the Ethernet ?March 6, 2023 at 18:18 in reply to: Select Wifi’s IP over Ethernet’s IP #43236
1) my NoMachine version is 8.4.2
2) netstat -lntu | command grep 4000
tcp 0 0 0.0.0.0:4000 0.0.0.0:* LISTEN
tcp6 0 0 :::4000 :::* LISTEN
udp 0 0 0.0.0.0:4000 0.0.0.0:*
udp6 0 0 :::4000 :::*
3) I tried to change NXdListenAddress to my WiFi’s adress but still not working.March 6, 2023 at 13:25 in reply to: Select Wifi’s IP over Ethernet’s IP #43227
i have tried solutions like this post, but, still i have the same problem!!
https://superuser.com/questions/331720/how-do-i-set-the-priority-of-network-connections-in-ubuntuMarch 6, 2023 at 13:05 in reply to: Select Wifi’s IP over Ethernet’s IP #43226
Hello Tom and thanks for the help.
You are correct.
When I don’t have connect the Ethernet cable in the computer, NoMachine works fine!!
My IP list, which NoMachine shows me, is the following:(for example)
but when I connect Ethernet (which provide ONLY data from LIDAR to pc) then my IP list is:
nx://192.168.1.10:4000 (Ethernet IP)
ssh://192.168.1.10:22 (Ethernet IP)
nx://192.168.1.20:4000 (Wi-Fi IP)
ssh://192.168.1.20:22 (Wi-Fi IP)
and I can’t connect from tablet to pc even if I try both of IPs. I think this thing happens because they use both the same port (default:4000) and Ethernet has priority over Wi-Fi.
When I said “if I gave the PC’s host” I meant that I filled the host blank box with Wi-Fi’s IP (192.168.1.20), port:4000 and protocol:nx, following the instrustions.
Is there any way to make NoMachine give priority to Wi-Fi over Ethernet ? Or make NoMachine “don’t see” Ethernet ports, because in general I want Ethernet, as it provides measurement data to pc from LIDAR.
I uncheck the ‘ethernet ports’ option from NoMachine App Settings, but the app still recognizes when I plug in an Ethernet cable.
Thanks again for the help.March 6, 2023 at 11:35 in reply to: Select Wifi’s IP over Ethernet’s IP #43218
Is there any way to fix this through server.cfg or node.cfg ?