Forum Replies Created
-
AuthorPosts
-
October 17, 2014 at 11:02 in reply to: Unable to logon to machines that are joined to the domain #5014rezaParticipant
Please try “domain\user”.
rezaParticipantPlease keep in mind that SSH support is not available in NoMachine product, you need at least NoMachine Workstation or NoMachine Enterprise Desktop. On Linux and MacOSX SSH by default work on port 22 but in case of Windows by default it’s port 4022.
For more informations please refer to https://www.nomachine.com/AR01L00770.
rezaParticipantDefault Windows security settings don’t allow to log-in from remote without a password.
Please refer to https://www.nomachine.com/AR05L00802.
rezaParticipantPlease see the following thread:
https://www.nomachine.com/forums/topic/authentication-failed-with-error-6
If that doesn’t help, please send the output of the following to issues [at] nomachine [dot] com:
1) /etc/pam.d/nx, /etc/pam.d/su, /etc/pam.d/system-auth, /etc/pam.d/sshd, /etc/pam.d/password-auth files
2) output of the command (after reproducing the issue):
sudo grep -r nxexec /var/log/*
Thank you.
rezaParticipantPlease enable logs and send them to issues[at]nomachine[dot]com.
How to gather debug logs is explained in following article:
rezaParticipantPlease, if you have AppArmor or SELinux enabled disable them and try once again.
If the problem is still there, please enable logs and send them to issues[at]nomachine[dot]com.
How to gather debug logs is explained in following article:
rezaParticipantExternal IP and port are taken from your local router with help of UPnP and NAT-PMP protocols.
These protocols don’t work reliably with some routers and there is no 100% guarantee that external ip/port will be successfully discovered.
Please tell us exact model number of your Airport Extreme device, we will try to test it.
August 29, 2014 at 12:43 in reply to: Configure NX to connect to desktop manager in display :1? #4566rezaParticipantHi Jugdish,
I’m sorry for misleading.
If you have two X servers, one on display 0 and second on display 1,
only one from them can be active.
To activate the second you have to switch virtual terminal.
rezaParticipantPlease take a look at:
https://www.nomachine.com/AR0500591
https://www.nomachine.com/AR07K00676
Problem will be solved in upcoming 5.0.
rezaParticipantLogs would be useful, please follow the instructions here on how to enable and extract them (https://www.nomachine.com/AR07K00677).
You can send them to issues[at]nomachine[dot]com. Make sure you reference your topic title.
Thank you
rezaParticipantPlease take a look at:
https://www.nomachine.com/AR0500591
https://www.nomachine.com/AR07K00676
Problem will be solved in upcoming 5.0.
rezaParticipantManu Sinha,
Can you verify that you can connect from Windows machine to Linux port 4000?
Thank you.
rezaParticipantPlease assure that you set correct host name or IP address instead of ‘UNIX IP’.
For example:
10.0.0.1
hostname
hostname.domain.com
rezaParticipantWe will need complete set of logs to investigate further. Please follow the instructions here:
https://www.nomachine.com/AR07K00677
Send them to issues[at]nomachine[dot]com
rezaParticipantPlease assure that you are following most recent version of article.
Couple of weeks ago the article was modified to let non root users use it and didn’t include a command for restarting a server anymore. It is no longer needed. -
AuthorPosts